Seakeeper Ride Zinc Anode Kit [12833SP]

VIEW ALL REVIEWS
$40.40
Zinc Anode KitThe Actuators on each Seakeeper Ride controller have sacrificial anodes that need to be periodically inspected and replaced when about half of the anode has worn down.Installation Remove the blade by unscrewing the...
Available:
In stock

Tags: Boat Outfitting, Boat Outfitting | Trim Tab Accessories, Brand_Seakeeper Ride

SKU: BPD-100505

Category: Boat Outfitting, Boat Outfitting - Trim Tab Accessories, Minn Kota

Vendor:Seakeeper Ride

Quantity:
- +
Guaranteed safe checkout:
PayPal
Venmo
Same-Day shipping
This item is available for 2 day shipping

Zinc Anode Kit

The Actuators on each Seakeeper Ride controller have sacrificial anodes that need to be periodically inspected and replaced when about half of the anode has worn down.

Installation

  1. Remove the blade by unscrewing the four (4) M8-1.25 x 20mm screws and their washers.
  2. Unscrew the two (2) M4-0.7 x 12 mm bolts holding the zinc sacrificial anode.
  3. Attach the new zinc sacrificial anode using the two (2) M4-0.7 x 12mm bolts and tighten to 20 in-lbs (2.3 N-m).
  4. Reattach the Blade using the four (4) M8-1.25 x 20mm screws and their washers. Be sure to use thread-locking sealant with an activator/primer when reinstalling hardware. Torque these four (4) bolts to 80 in-lbs (9.0 N-m) in an "X" pattern.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RECENTLY VIEWED PRODUCTS